Replacement Of The Monitor Transportation Lock (Bt09 Only) - GE Voluson E8 Service Manual

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
Section 8-16

Replacement of the Monitor Transportation Lock (BT09 only)

NOTE: The Monitor Transportation Lock is only used if the "outdated" monitor arm (KTZ154817) is mounted on
the Voluson system.
8-16-1 Manpower
One person, 2 minutes
8-16-2 Tools
Phillips screwdriver PH1 and PH2
8-16-3 Monitor Transportation Lock - Removal Procedure
1.) Unscrew 1 screw, then remove the Monitor Transportation Lock.
8-16-4 Monitor Transportation Lock - Installation Procedure
1.) Attach the new Monitor Transportation Lock and fasten it with 1 screw.
8-24 Section 8-16 - Replacement of the Monitor Transportation Lock (BT09 only)
7 DRAFT (A
EVISION
Figure 8-26 remove 1 screw
23, 2012)
UGUST
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
Monitor
Transportation Lock
1 screw
E6