GE Voluson E8 Service Manual page 86

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
6.) Press the ↓ (down) button repeatedly, until [MENU GRADE] is highlighted.
7.) Press the → (right) button and select [ENHANCED].
8.) Press the ← (left) button, to exit the "Menu Grade" menu.
NOTE: Now additional items (see:
9.) Select [TV SYSTEM] by pressing the ↓ (down) button.
REGION CODE
TV SYSTEM
10.)Press the → (right) button. The "TV System" Sub menu appears.
11.)Select the appropriate video signal by pressing the ↑ (up) or ↓ (down) button respectively.
12.)Press the SET button (C).
13.)When "Power off" appears on the display, press the POWER switch on the front of the DVD
14.)Press the POWER switch again to turn power on.
3-20
7 DRAFT (A
EVISION
Figure 3-14 "Setup Menu" - [MENU GRADE] highlighted
Figure 3-15 on page
Figure 3-15 "Setup Menu" - [TV SYSTEM] highlighted
To check the video signal, see:
The message "Now loading..." appears and the system starts to save the settings.
recorder to turn power off.
Section 3-5 - Connection of Auxiliary Devices
23, 2012)
UGUST
3-20) are displayed in the "Setup Menu".
Table 3-6, "TV-System and Region Code," on page
V E8 / V
OLUSON OLUSON
S M
ERVICE
change MENU GRADE
to ENHANCED
Menu Grade: ENHANCED
3-21.
E6
ANUAL