Connecting The Wireless Network Adapter - GE Voluson E8 Service Manual

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
3-5-6

Connecting the Wireless Network Adapter

1.) Turn ON the power of the system and wait till the system has booted.
2.) Plug the Wireless Network adapter into an accessible USB port of the Voluson E8 / Voluson E6.
All software drivers are pre-installed for the designated Wireless Network adapter only.
The Wireless Network Adapter can be connected to any accessible USB port of the Voluson E8 /
Voluson E6.
PC
RS-
232
USB
UI
USB 3
USB 4
USB 5
USB 6
Audio
Lift is only used for the lifter
(230V - can not be changed)
Figure 3-17 Connection Scheme - Wireless (USB) Network Adapter
NOTE: Connection of the WLAN Adapter is always the same
(no differences between PC-Motherboard and/or BT-version of the system).
NOTE: After physical connection of the WLAN adapter to the Voluson E8 / Voluson E6 system, follow the
procedure described in
3-22
7 DRAFT (A
EVISION
Console back
ECG
UI-Top
USB Hub
Top
LAN
Line Out Line In
DVI Out
DVI - Out
DVI - In Monitor
Section 3-11-2 "Wireless Network Configuration" on page
Section 3-5 - Connection of Auxiliary Devices
23, 2012)
UGUST
DVD Writer text
S - Video
Out Out In
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
3-62.
E6