Adjustment Of The Dvd Recorder Settings; Changing The Remote Interface To Usb - GE Voluson E8 Service Manual

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
3-5-5-2

Adjustment of the DVD Recorder Settings

Please If you press the UTILITIES key on the Voluson E8 / Voluson E6 console and then EXT.VIDEO,
Note
you will see the actual screens (as shown here in this manual).
You can use the on-screen programming menu's instead of the LCD to setup the DVD recorder.
This ensures that all cables have been properly connected first!
3-5-5-2-1

Changing the Remote Interface to USB

1.) If not already done, switch on the Sony DVO-1000MD DVD recorder.
2.) Press the MENU button (A) located on the front of the DVD recorder see
3.) The "Main Menu" appears on the LCD screen of the DVD recorder, see:
4.) Press the ↓ (down) button on the front of the recorder repeatedly until the [SETUP MENU] item
Each time you press the ↑ (up) or ↓ (down) button, the highlight cursor moves up/down item by item.
NOTE:
5.) Press the → (right) button. The "Setup Menu" appears.
3-18
7 DRAFT (A
EVISION
Left
Figure 3-10 Keys on the front of the recorder
Figure 3-11 "Main Menu" - [SETUP MENU] highlighted
is highlighted.
Section 3-5 - Connection of Auxiliary Devices
23, 2012)
UGUST
V E8 / V
OLUSON OLUSON
S
ERVICE
Figure 3-10
Up
Right
Down
Figure 3-11
select [SETUP MENU]
E6
M
ANUAL
below.
below.