How To Change Video Norm; How To Change Recorder Type; How To Adjust Function Of The Footswitch; How To Change The Keyboard Layout - GE Voluson E8 Service Manual

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
3-8-1-6

How to change Video Norm

1.) Invoke System Setup as described in
2.) On the left side of the screen select CONNECTIVITY and then click on the
select
Recorder Type
select
Video Norm
3.) If not currently selected, click the desired field PAL (50Hz) or NTSC (60Hz).
4.) Click SAVE&EXIT to save Settings and exit System Setup.
5.) The system will reboot.
3-8-1-7

How to change Recorder Type

1.) Invoke System Setup as described in
2.) On the left side of the screen select CONNECTIVITY and then click on the
3.) Depending on the used Recorder type, click the field VCR, DVD (Sony, JVC or internal DVR-Drive).
4.) Click SAVE&EXIT to save Settings and exit System Setup.
3-8-1-8

How to adjust function of the Footswitch

1.) Invoke System Setup as described in
2.) On the left side of the screen select CONNECTIVITY and then click on the
3.) Select desired function of the Footswitch.
4.) Click SAVE&EXIT to save Settings and exit System Setup.
3-8-1-9

How to change the Keyboard Layout

see: Chapter 6 - Modification of Keyboard Layout, on page
3-8-1-10

How to configure Service Platform

see: Chapter 7 - How to configure the Service Platform, on page
3-52
7 DRAFT (A
EVISION
Figure 3-53 System Setup - Connectivity - PERIPHERALS page
Section 3-8 - System Configuration
23, 2012)
UGUST
Section 3-8-1-1 on page
Section 3-8-1-1 on page
Section 3-8-1-1 on page
6-9.
V E8 / V
OLUSON
S
ERVICE
3-49.
PERIPHERALS
3-49.
PERIPHERALS
3-49.
PERIPHERALS
7-15.
E6
OLUSON
M
ANUAL
tab.
Foot
Switch
tab.
tab.