GE Voluson E8 Service Manual page 317

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
UI_BBC_Wnd::vSet() will change from eB_Wnd to wrong ImageType
Action: restart the system
UI_BBC_Wnd::vSet() will change from eBBC_Wnd to wrong ImageType.
Action: restart the system
UI_Manager: failed to create BBC Wnd. Action: restart the system
UI_Manager::vDestroyWnd: dynamic cast to UI_MMC_Wnd* failed
UI_Manager::vDestroyWnd: dynamic cast to UI_PW_Wnd* failed
UI_Manager::vHRS_Execute multiple call
Unable to complete export the TA!
Unable to complete export the TA!Unable to create new HDF5 file for TA!
undefined CW ADC_Clk-Teiler
Unexpected exception occurred!!
Unhandled Probe-EEPROM data type on Attempt to read Probe-ID from an invalid
probe connector. Action: restart system
Unhandled Probe-EEPROM data type on left probe connector (A).
Unhandled Probe-EEPROM data type on middle probe connector (B).
Unhandled Probe-EEPROM data type on right probe connector (C).
Unhandled Probe-EEPROM data type on upper-left probe connector (CW).
Unit ID calculated in bGetUnitByStamp out of range
Unknown Error
Unknown Error Action: Load volume files from other storage medium.
Unknown system exception
unknown Xilinx-Version
unrecordable disc or disc is closed
VCR communication error! Check VCR cables and try again.
VCR not properly connected or turned off! Check connection from US machine to
VCR, VCR has power and is on.
VCR timeout error! Check VCR cables, cassette,... and try again.
Verify error (Error while checking backup data.)
ViewerConMngr::vAssembleCF_DFE: attempt to get ECG_Consumer_2D- or
ECG_Draw_2D-Block from ECGViewer Objects failed!!
ViewerConMngr::vAssembleM_DFE: attempt to get ECG_Consumer_2D- or
ECG_Draw_2D-Block or ECG-CalcHR-Block from ECGViewer Objects failed!!
7 DRAFT (A
EVISION
Error Messages
Chapter 7 - Diagnostics/Troubleshooting
23, 2012)
UGUST
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
check free disk space
restart the system
restart the system
Connect another probe
Connect another probe
Connect another probe
Connect another probe
Connect another probe
restart the system
check VCR connections and if its switched on
load volume files from other storage medium
restart the system
restart the system
try again with another disk
check VCR connections, check if it is switched on
check VCR connections, check if it is switched on
check VCR connections, check if it is switched on
Backup data are probably damaged.
Try again or load another backup.
restart the system
restart the system
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
Actions
7-45
E6