GE Voluson E8 Service Manual page 318

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
ViewerConMngr::vAssembleM_DFE: attempt to get ECG_Consumer_2D- or
ECG_Draw_2D-Block or ECG-CalcHR-Block from ECGViewer Objects failed!!
Action: Restart the system, If after restart not ok then call technical support
ViewerConMngr::vAssembleTissueDFE : attempt to get ECG_Consumer_2D- or
ECG_Draw_2D-Block from ECGViewer Objects failed!!
Volume_dB Out Of Range
WMF_KoefBlock: SamplePRF too big
Write error! Action: use a new CDR, call technical support
Write Protected cassette! Remove cassette from VCR and put writeable cassette
into drive of VCR.
Write Protected DVD! Remove DVD and put writeable DVD into drive of recorder.
Wrong disc type! Please enter a data disc and try again.
Wrong key!
Wrong Monitor Type detected!
The installed software supports monitor type "MDM100" only.
Please replace the monitor to avoid image quality issues!
XTD - pucBackScaledBImage: Memory allocation failed
XTD - pucDSCBImage: Memory allocation failed
XTDTrackballCtrlState::No frame to trackball position found, internal failure!!
7-46
7 DRAFT (A
EVISION
Error Messages
Section 7-9 - Error Messages
23, 2012)
UGUST
restart the system
restart the system
press ok and save this user-setting once again
restart the system
use a new CDR
Remove cassette from VCR and put writeable cassette
into drive of VCR
Put writeable DVD into Drive
enter data disc and try again
restart the system
contact your GE sales/service representative
restart the system
restart the system
restart the system
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
Actions
E6