GE Voluson E8 Service Manual page 182

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
4-6-2 Measure Setup
Press the UTILITIES key on the control panel and then touch MEASURE SETUP.
The Measure Setup desktop offers three different pages to check.
NOTICE Parameters and possible adjustments depend on the selected Application.
To view, add, delete, reorder, edit or when creating a new parameter (in the
!! NOTICE:
is very important that all items are chosen correctly and that the relevant item is highlighted.
For further information refer to the Basic User Manual of Voluson E8 / Voluson E6.
Table 4-12
Step
Measure & Calc:
1
Check all settings for all applications
Application Parameters:
2
Check all settings for all applications
3
Global Parameters: Check all settings
Section 4-7
Peripheral Checks
Check that peripherals work as described below:
Table 4-13
Step
Press the FREEZE key.
1
Press the remote key (P1, P2, P3 or P4 ),
2
which is assigned to the BW printer.
Press the remote key (P1, P2, P3 or P4 ),
3
which is assigned to the color printer.
Press the remote key (P1, P2, P3 or P4 ),
4
which is assigned to recorder control.
4-7-1 ECG Check Out
Connect the ECG preamplifier MAN and check:
Table 4-14
Step
1
4-46
7 DRAFT (A
EVISION
Measurement Setup Checks
Task
Peripheral Checks
Task to do
ECG preamplifier Check
Task
Press the UTILITIES key on the control panel and then
touch the ECG button to display the "ECG" menu.
Section 4-7 - Peripheral Checks
23, 2012)
UGUST
setting assigned as desired by the customer
setting assigned as desired by the customer
setting assigned as desired by the customer
Expected Result(s)
Stop image acquisition.
The image displayed on the screen is printed on the Black & White
printer.
The image displayed on the screen is printed on the Color printer.
Recording starts/stops.
It will display a curve along the bottom edge of the image
sector.
V E8 / V
OLUSON OLUSON
S
ERVICE
MEASURE & CALC
Expected Result(s)
Expected Result(s)
E6
M
ANUAL
page), it