GE Voluson E8 Service Manual page 71

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
Section 3-3 Receiving and Unpacking the Equipment
Table 3-4
Step
1.
Loosen the screws. DO NOT remove the top panel, just place it on the crate (about middle of side walls).
2.
Take off the front panel, then remove probes and accessories from the wooden box.
Afterwards pull out all the horizontal wooden racks for accessories, finally remove also the vertical board.
CAUTION
!! CAUTION:
7 DRAFT (A
EVISION
Figure 3-4 envelope at front panel of the crate
Unpacking Procedure
tilt and drop
indicator
envelope with
packing list
accessories
probes
DO NOT open side panels prior to removing the front panel!
Accessories could drop down and DAMAGE the user interface!
Chapter 3 - Setup Instructions
23, 2012)
UGUST
The envelope with delivery address, packing list and
invoice is located on the front panel of the crate.
Check whether delivery is complete
(according to packing list) and check visual damage!
Task
V E8 / V
OLUSON OLUSON
S
ERVICE
(cont'd)
place the top panel
on the crate
(middle of side walls)
CAUTION
!! CAUTION:
DO NOT remove
the top panel.
finally remove
vertical board
horizontal
wooden racks
for accessories
E6
M
ANUAL
3-5