Example Procedure: Measure Or Source Current - GE Measurement & Control Druck DPI 620 Genii User Manual

User Manual
2.4

Example Procedure: Measure or Source Current

Figure 2-10 shows CH1 set-up to measure or source a
current with external loop power
Note: When using the CH2 connectors, set CH 2 to measure
or source these ranges with internal or external loop power.
Set the appropriate function by selecting mA or mA +24V.
Loop drive has three possible settings:
Figure 2-10 Measure current on CH1. Range ± 55 mA
1. Set the applicable software option
2. Complete the electrical connections and
continue with the measure or source operation
3. Source only (Automation). Set the applicable
output value
06 June 2013
1) OFF 2) 24V 3) 28V
Druck DPI620 Genii
Page 45 of 179