Changing Tv System (Video Format) - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
6.) Press the ↓ (down) button on the front of the recorder repeatedly until [REMOTE I/F] is
7.) Press the → (right) button to enter the REMOTE I/F menu.
8.) Press the ↓ (down) button until you see USB on the screen.
9.) Press the SET button (C) - on the front of the DVD recorder - to select USB.
Your DVD recorder is now using USB Remote Interface.
3-5-5-2-2

Changing TV System (Video Format)

NOTE: To check Video format needed, see:
1.) If not already done, switch on the Sony DVO-1000MD DVD recorder.
2.) Press the MENU button (A) located on the front of the DVD, see:
3.) The "Main Menu" appears on the LCD screen of the DVD recorder, see:
4.) Press the ↓ (down) button on the front of the recorder repeatedly until the [SETUP MENU] item
5.) Press the → (right) button. The "Setup Menu" appears, see
7 DRAFT (A
EVISION
highlighted, see Figure 3-14 on page
Figure 3-12 "Main Menu" - [REMOTE I/F] highlighted
Figure 3-13 "Main Menu" - [SETUP MENU] highlighted
is highlighted.
Chapter 3 - Setup Instructions
23, 2012)
UGUST
3-20.
Table 3-6, "TV-System and Region Code," on page
V E8 / V
OLUSON OLUSON
S
ERVICE
change REMOTE I/F
to USB
3-21.
Figure 3-10 on page
Figure 3-13
select [SETUP MENU]
Figure 3-14 on page 3-20.
E6
M
ANUAL
3-18.
below.
3-19