GE Voluson E8 Service Manual page 269

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
Section 6-5
Control Console Positioning
The control console can be rotated, translated and adjusted in height.
6-5-1 Translation/Rotation Adjustment
Press the BRAKE button on the inside of the handlebar opening.
Rotate/translate the console to the desired position.
[Elevation] button
for height adjustment of
the control console
Press the BRAKE button again in order to secure the console against uncontrolled movement.
The system should NOT be moved with the Control Console (UI) extended.
CAUTION
DO NOT put your hand between the control console and the Main system when moving the
!! CAUTION: Control Console to its centered and locked position: Danger of injuries!
6-5-2 Height Adjustment (Elevation)
Control console elevation adjustment is done with the ELEVATION key on the control panel.
As long as the ELEVATION key is pressed, the control console can be lifted/lowered by means of the
UP or DOWN button displayed on the Touch Panel (soft keys for safety reason).
Make sure that nothing would be jammed while moving!
CAUTION
!! CAUTION:
7 DRAFT (A
EVISION
Figure 6-7 Buttons for Control Console Adjustment
Chapter 6 - Service Adjustments
23, 2012)
UGUST
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
[Brake] button
for locking and unlocking
the control console
E6
6-7