GE H
DRAFT
EALTHCARE
D
KTD102576, R
IRECTION
4-4-12
Erasing DVD/CD
1.) Press the UTILITIES key on the control panel.
2.) In the "Utilities" menu touch SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select CONNECTIVITY and then click the
4.) Click the ERASE CD button to displays the "Erase DVD/CD" window as shown in
5.) Select the "Erase Mode" and click the [OK] button to start the process.
NOTICE
It is highly recommended to use the complete erase mode, to avoid problems with the CD+(R)W!
When using a DVD+R/RW, the complete erase mode is not possible.
!! NOTICE:
6.) When erasing is finished, select EXIT to return to the Scan Mode.
7
DRAFT (A
EVISION
Figure 4-20 System Setup - Connectivity - DRIVES page
Figure 4-21 Erase DVD/CD Window
Chapter 4 - Functional Checks
23, 2012)
UGUST
V
E8 / V
OLUSON
OLUSON
S
M
ERVICE
ANUAL
DRIVES
tab.
[Erase CD]
button
Figure
4-21.
4-31
E6