How To Activate Screen Lock - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
3-8-1-5

How to activate Screen Lock

1.) Invoke System Setup as described in
2.) On the left side of the screen select GENERAL and then click on the
3.) Check mark "Screen Lock".
a.) If no password previously entered, the following dialog appears.
b.) Enter "New Password".
NOTE: A new screen lock password must be at least 6 characters long and has a maximum length of 80
characters. The password must contain at least 2 non-letter characters, 0...9 or !@#$%^*().
c.) "Retype new Password" and then click SAVE&EXIT to save new screen lock password.
4.) Click SAVE&EXIT to save Settings and exit System Setup.
NOTE: If screen is locked you have to enter the password to get full system control.
If password is unknown click EMERGENCY. This enables standard - but limited - operation.
NOTICE
The Screen Lock password cannot be reset by the user! Please contact your GE service representative.
!! NOTICE:
7 DRAFT (A
EVISION
Figure 3-52 Screenlock Password
Chapter 3 - Setup Instructions
23, 2012)
UGUST
Section 3-8-1-1 on page
V E8 / V
OLUSON OLUSON
S
ERVICE
3-49.
GENERAL tab.
E6
M
ANUAL
3-51