Table of Contents
Advertisement
Parameter box
Temperature measurement
Temperature measurement
Start measurement
– Use a protective sheath for rectal sensors.
– Apply the sensor(s) to the patient and connect with
the parameter box (colour-coded green).
Correct temperature values are displayed after approx.
three minutes.
Display:
If programmed, the small temperature module is
displayed under the softkeys. To set this display mode,
see page 61.
Alternative:
Select numerical module display with
»Screen configuration«.
98
36.8
°C
T1
37.2
°C
T2
°C
T1
T2
36.8 37.2
Advertisement
Chapters
Table of Contents
