Care Schematic; Care Intervals For Individual Components - Dräger Cicero EM Instructions For Use Manual

Care
Disinfection / Cleaning / Sterilization

Care schematic

Care intervals
Care schematic
Stripping down
machine
Use
Check machine according to
checklist immediately before use
Machine ready for use
Care intervals:
A number of steps can be omitted if microbial filters are used in the inspiratory and expiratory lines. The following
table is intended as a guide; it does not replace the directions of the hospital's hygiene officer!
Component:
Tube, mask
Y-piece
Both breathing hoses
Temperature sensor (breathing gas) with lead after every patient
T-piece and filter of measured gas
sampling system
Flow sensor downstream of expiration nozzle
Breathing bag with hose
Breathing system
Soda lime container
Anaesthetic gas scavenging hose
Piston pump
122
Machine without parts in contact
with patient gas
Manual preliminary
cleaning
In automatic dis-
infection unit Aseptor
Manual, scrubbing,
wipe disinfection
Check operational readiness
Non-infectious patients
with microbial filters:
after every patient
after every patient
after every patient
after every patient
daily
daily
weekly
daily
weekly
weekly
Dismantling parts in contact
with patient gas
In automatic disinfection
unit ANDA / Purfactor
Steam sterilization at 134 / 121 °C
Reassembling machine
in acc. with
Instructions for Use
without microbial filters:
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
weekly
after every patient
Manual, scrubbing, wipe and
instrument disinfection
Care, rinsing and drying
Assembly
Infectious patients
with or without microbial filters:
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient
after every patient