Reassembling machine
Reassembling the parts
Reassembling machine
Reassemble cleaned, disinfected and
sterilized parts
Assemble the piston pump:
Check individual parts:
Gaskets:
pressure marks? cracks?
Diaphragm:
cracks? holes? deformation?
Defective parts must be replaced!
1 Fit roller diaphragm -
production mark visible on the outside (arrow) -
2 Insert piston - carefully place the rolled edge round
the edge of the piston -
3 Screw piston into position (not quick-release) -
4 Fit cylinder head and secure in position (two quick-
release catches).
Assemble the breathing system:
Check individual parts:
Gaskets:
pressure marks? cracks?
Diaphragms: cracks? holes? deformation?
Valve discs: chipped?
Defective parts must be replaced!
5 The six holes must be clear!
6 Fit valves if necessary -
Place upper and lower parts of breathing system on
top of one another -
7 Secure the five quick-release catches.
(6 mm hexagon key)
126
4
1
4
7
2
3
5
6