Basic Screen Settings - Dräger Cicero EM Instructions For Use Manual

Basic screen settings:

1
R
3
F
2
4
5
6
7
8
9
10
11
12
13
A1
14
A2
15
16
The contrast and background brightness of the screen can be
set directly with the keys. The keypad is located on the back of
the monitor (item 18 on page 148).
1 Keys for adjusting the background brightness of the screen.
»+« increases the brightness
»–« reduces the brightness
2 Keys for adjusting screen contrast
»+« increases the contrast
»–« reduces the contrast
3 Key »R« (»Reset«) resets all the user settings to the factory
settings.
4 Key »F« (»Function«) calls up other setting facilities that are
required less often.
After pressing »F« for the first time, invariable frequency
displays are shown on screen.
After pressing for the second time, a menu appears in the top
third of the screen with the corresponding symbols.
Use the brightness key (1) to select parameters within this
menu;
Use the contrast key (2) to change the settings.
Meanings of the individual symbols:
5 Change picture width
6 Change picture height
7 Change horizontal picture position
8 Change vertical picture position
9 Adjust pin-cushion or barrel distortion
10 Brightness after reset
11 Contrast after reset
12 Background blue (inactive)
13 Background red (inactive)
14 Background green (inactive)
15 Unused (inactive)
16 White balance between colours R, G and B
What's what
149