General Settings; Acoustic; List Entry - Dräger Cicero EM Instructions For Use Manual

Configuring the general settings
The following can be switched on (»yes«) or off (»no«):
units Indication of the units.
Temperature
display Option to display the body temperatures in
the bottom right-hand corner of the screen
(below the softkeys).
This display configuration saves space for
a numerical module.

Acoustic

The volume and tones are defined here.
»0« equals »off«, while »1« is the lowest and »9« the
highest volume.
alarm sound Volume of the alarm
pulse tone Volume of the pulse tone
SpO -modulated
2
ECG pulse tone The ECG pulse tone can optionally
be modulated with the SpO
tone sequence Specifies the tone sequence.
Either ISO or Dräger standard.

List entry

A menu is displayed to allow the user to select at
what times (fixed intervals) or events (warning, caution
message, NiBP measurement) list entries are to be
made.
In addition, this menu defines the source of the blood
pressure value and whether EEG entries are required.
If EEG entries are selected, they replace the temperature
entries.
Standby / Configuration
unit
temperature-
display
06-12-98
11:59
00:00
Standby / Configuration
alarm sound
pulse tone
pulse tone
source
tone sequence
value.
2
06-12-98 11:59
00:00
Standby / Configuration
06-12-98 11:59
00:00
System screen functions
Configuring the system screen in »Standby«
Settings
mode adult
alarm limits
parameter
screen
standard - screen 1 acoustic
list entry
standard - screen 2
standard - screen 3 transport
colour RS 232 (Medibus)
record (printer)
curve speed
basic config.
yes no

general settings

yes no
Screen configuration menu. Please confirm !
Settings
mode adult
alarm limits
parameter
screen
1 2 3 4 5 6 7 8 9
acoustic
0 1 2 3 4 5 6 7 8 9
list entry
ECG Pleth.
transport
DRÄGER Euro-Stand.
RS 232 (Medibus)
record (printer)
basic config.
Alarm sound and pulse tone configuration menu. Please confirm !
Settings
mode
adult
alarm limits
parameter
screen
acoustic
time interval 1 2 5 10 off
trigg. by warning on off
list entry
trigg. by caution on off
transport
with every
BP source iBP 1 iBP 2
NIBP
RS 232 (Medibus)
pEEG on off
record (printer)
basic config.
List configuration menu. Please confirm !
alarms inactive !
neon.
alarms inactive !
neon.
alarms inactive !
neon.
61