Table of Contents
Advertisement
The following dialogue is then displayed on the system
screen:
»Do you want to transfer the following data from the
parameter box?«
Settings yes/no
If »yes«, the settings of the measurement parameters
are transferred from the box (e.g. iBP calibration,
NiBP interval, ECG amplitude, etc.).
If »no«, the current system screen settings remain
valid.
Alarm limits yes/no
If »yes«, the alarm limits are transferred.
If »no«, the current settings of the system screen will
remain valid.
List yes/no
If »yes«, the data stored in the parameter box is
transferred and inserted in the list.
If »no«, the data stored in the parameter box is not
transferred.
In normal operation (see section on the »Parameter box«
on pages 86), this dialogue is only displayed when the
»Transport menu« is set to »yes«. Otherwise, the
instructions programmed here are executed directly.
External Dräger RS-232 interface (MEDIBUS)
The interface parameters for data transfer are pro-
grammed here:
Settenigs for connecting the Dräger pEEG monitor:
baud rate: 1.2 or 9.6
parity:
even (Information only, cannot be selected!)
data bits:
8
(Information only, cannot be selected!)
stop bits:
1
(Information only, cannot be selected!)
Configuring the system screen in »Standby«
Standby / Configuration
transport
function
on
transport-
menus
yes
The patient is new
to the:
monitor
yes
parameter
box
yes
Which data do you want
to transfer from the
parameter box?
settings
yes
alarm limits
yes
list
yes
Select a menu position. Please confirm !
06-12-98
11:59
Change the settings. Please confirm again !
00:00
Standby / Configuration
baud rate (kBaud)
1.2
parity
even
data bits
8
stop bits
1
06-12-98
11:59
Medibus interface configuration menu. Please confirm !
00:00
System screen functions
alarms inactive !
Settings
mode
adult
neon.
off
alarm limits
parameter
no
screen
acoustic
no
list entry
transport
no
RS 232 (Medibus)
record (printer)
basic config.
no
no
no
alarms inactive !
Settings
mode
adult
neon.
alarm limits
parameter
screen
acoustic
9.6
list entry
transport
RS 232 (Medibus)
record (printer)
basic config.
63
Advertisement
Chapters
Table of Contents
