Emulation - Carl Valentin DYNACODE II IP53 Operating Manual

Function Menu
Protocol
Printhead resolution
Drive mapping
PJL (Printer Job
Language)
94

10.17 Emulation

CVPL: Carl Valentin Programming Language
®
ZPL: Zebra Programming Language
Change between CVPL protocol and ZPL II
The printer performs a restart and ZPL II
into CVPL commands internally by the printer and then executed by
the printer.
®
At activated ZPL II emulation the printhead resolution of the emulated
printer must be set, e.g. 11.8 Dot/mm (= 300 dpi).
NOTICE!
If the printhead resolution of the Zebra
of the Valentin printer, then the size of objects (e.g. texts,
graphics) complies not exactly.
®
The access to Zebra
B: CF card
E: Flash drive
R: RAM disk (standard drive, if not indicated)
is rerouted to the corresponding Valentin drives
A: CF
R: RAM disk
U: USB stick
This can be necessary if the available space on the RAM disk (at
present. 512 KByte) is not sufficient or if bitmap fonts are downloaded
to the printer and be stored permanently.
NOTICE!
As the printer build-in fonts in Zebra
in Valentin printers, this can cause small differences in the text
image.
The processing of PJL commands (Hewlett Packard
Language) can be switched On/Off. Status information relating to the
print order can be queried.
Operating Manual
®
®
commands are transformed
drives
®
Dynacode II IP
protocol.
®
printer differs from that
printers are not available
®
Print Job
03.21