Cycle Optimisation (Intermittent Mode) - Carl Valentin DYNACODE II IP53 Operating Manual

Dynacode II IP
03.21

12.7 Cycle Optimisation (Intermittent Mode)

NOTICE!
The cycle is a finished print cycle per a unit of time.
Figure 27
In case of 'time critical' applications you have the possibility with a
good selection of different device parameters to increase the effective
print speed and it this way the clock cycle.
•
Generally increase the print speed.
•
Generally increase the back speed.
•
Increase the acceleration and brake ramp.
•
Change the zero point of the machine.
•
Avoid vertical installation position of the print mechanics. Install
the machine in horizontal position.
•
Control the short distance between the printhead and the print
surface.
•
Switch off the foil saving automatic.
•
Optimise the layout to a short print way, i.e. less blanks, no
borders at the top res. bottom, rotate the layout.
Operating Manual
Maintenance and Cleaning
131