Emulation; Print Job - Carl Valentin SPE II 106/12 Operating Manual

SPE II
Protocol
Printhead resolution
Drive mapping
PJL (Printer Job
Language)
11.20

8.10 Emulation

CVPL: Carl Valentin Programming Language
®
ZPL: Zebra Programming Language
Change between CVPL protocol and ZPL II
The printing system performs a restart and ZPL II
transformed into CVPL commands internally by the printing system
and then executed by the printing system.
®
At activated ZPL II emulation the printhead resolution of the emulated
printing system must be set, e.g. 11.8 Dot/mm (= 300 dpi).
NOTICE!
If the printhead resolution of the Zebra
from that of the Valentin printing system, then the size of
objects (e.g. texts, graphics) complies not exactly.
®
The access to Zebra
B: CF card
E: Flash drive
R: RAM disk (standard drive, if not indicated)
is rerouted to the corresponding Valentin drives
A: CF
R: RAM disk
U: USB stick
This can be necessary if the available space on the RAM disk (at
present. 512 KByte) is not sufficient or if bitmap fonts are downloaded
to the printing system and be stored permanently.
NOTICE!
As the printing system build-in fonts in Zebra
are not available in Valentin printing systems, this can cause
small differences in the text image.
The processing of PJL commands (Hewlett Packard
Language) can be switched On/Off. Status information relating to the
print order can be queried.
Operating Manual
®
drives
Function Menu
protocol.
®
commands are
®
printing system differs
®
printing systems
®

Print Job

69