Carl Valentin DYNACODE II IP53 Operating Manual page 66

Function Menu
Autoload
Hotstart
Codepage
66
On: A layout loaded once from CF card, can be reloaded after a
restart of the printing system automatically.
Procedure: The used layout is saved onto CF card. The layout is
loaded from CF card and printed. After switching the printing system
Off and again On, the layout is loaded from CF card automatically and
can be printed again.
NOTICE!
The last loaded label from CF card is always again loaded after
a restart of printer.
Off: After a restart of printer the last used label must be again loaded
manually from CF card.
NOTICE!
A common use of the functions Autoload and Hotstart is not
possible. For a correct Autoload procedure the Hotstart must
be deactivated in the printer.
On: Continue an interrupted print order after switching on the printer
anew
Off: No question appears at the display. In this case the stored default
value is printed 15.1, page 149).
Indication of the font used in the direct print module.
The following possibilities are available:
Codepage 1252 West European (former ANSI)
Codepage 437 English
Codepage 850 Western European
Codepage 852 Slavic
Codepage 857 Turkish
Codepage 1250 Central and East European
Codepage 1251 Cyrillic
Codepage 1253 Greek
Codepage 1254 Turkish
Codepage 1257 Baltic
WGL4
Please find the tables referring to the above mentioned character sets
on www.carl-valentin.de/Downloads.
Operating Manual
Dynacode II IP
03.21