Carl Valentin DYNACODE II IP53 Operating Manual page 146

Error Correction
Error message
110 Housing open
111 EAN.UCC code
112 Print carriage
113 Applicator error
114 Left position
115 Right position
116 Print position
117 XML parameter
118 Invalid variable
119 No ribbon
120 Wrong directory
121 No label PH2
122 IP occupied
146
Cause
When starting the print order
the housing cover is not closed.
Transferred EAN.UCC code is
invalid.
Printing carriage does not
move.
Option applicator
Error while using applicator.
Option applicator
Left final position switch is not
in correct position.
Option applicator
Right final position switch is not
in correct position.
Option applicator:
The applicator is not in the print
position when trying to print a
label.
The parameters in the XML file
are not correct.
Transferred variable is invalid
with customized entry.
During the print order the
ribbon roll becomes empty.
Defect at the transfer ribbon
photocell.
Invalid target directory when
copying.
No label found at the rear
printhead (DuoPrint).
Soiled label photocell.
Labels not inserted correctly.
The IP address was already
assigned.
Operating Manual
Dynacode II IP
Remedy
Close the housing cover and
start the print order anew.
Verify bar code data (see
corresponding specification).
Check gear belt (possibly
broken).
Check applicator.
Check LEFT final position
switch for correct function and
position.
Check function of pneumatics
for cross traverse.
Check RIGHT final position
switch for correct function and
position.
Check function of pneumatics
for cross traverse.
Check TOP and RIGHT final
position switch for correct
function and position.
Check pneumatics for function
Please contact your
responsible distributor.
Select correct variable without
customized entry and transfer
it.
Change transfer ribbon.
Check transfer ribbon photocell
(service functions).
Target directory must not be
within the source directory.
Check target directory.
Insert new label roll.
Clean the label photocell.
Check if labels are inserted
correctly.
Assign a new IP address.
03.21