Carl Valentin DYNACODE II IP53 Operating Manual page 120

Touch-Screen Display
Remove parameter
from process data
Change of display vies
Process data – Print
preview
120
Press long (2 s) on a parameter (e.g. current time) to display the
appropriate selection. Press Remove from process data to remove the
selected parameter from the process data list.
With activated print preview, the display shows a picture of the
currently printed layout. The change to the process data view is
effected by wiping to the right.
With activated print preview on the display a picture of the up-to-date
printed layout is shown.
Operating Manual
Dynacode II IP
03.21