Unpacking And Inspecting The System - ADTRAN TSU NetVanta Quick Start Manual

1

Unpacking and Inspecting the System

Each TSU NetVanta Router Module is shipped in its own cardboard shipping carton. Open each carton carefully,
and avoid deep penetration into the carton with sharp objects.
2 Reviewing the Module Design
(A) CONTROL Interface
The CONTROL interface provides access to the ADTRAN OS Command Line Interface (CLI). A 6 foot data cable
and an RJ-45 to DB-9 adapter (for connection to a standard PC COM port) are included in the TSU NetVanta
Router Module shipment. Table 1 provides the pinout for the CONTROL interface. Refer to Step 4a, Connecting to
the Module (Control Port Connection) for more details on using this interface.
Module
ROUTER X.1
CONTROL 10/100 BASE T
HOT
REPLACEABLE
Cable
RJ-45 to DB-9
Adapter
Table 1: Control Interface Pinout
Pin # Name
1 GND
2 RTS
3 TD
4 DSR
5 RD
6
a
CTS
7 DTR
8 DCD
a. Used for hardware flow control
PORT X.2
Quick Start Guide
Documentation
Description
Ground
Request To Send — Input
Transmit Data — Input
Data Set Ready — Output
Receive Data — Output
Clear To Send — Output
Data Transmit Ready — Input
Data Carrier Detect — Output
2
CD