Configure The Instrument Settings; Enable Or Disable Demonstration Mode; Edit The Instrument Name (Administrator Only); Set The Date And The Time - Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual

Chapter 11 Configure the instrument settings
11

Configure the instrument settings

2. Tap Privacy.
The privacy policy is displayed.
3. Tap Close.

Configure the instrument settings

Enable or disable demonstration mode

Note: The instrument restarts when demonstration mode is turned on or off.
When the instrument is in demonstration mode, the following features apply:
• The instrument simulates a run but does not start a run.
• The instrument drawer will not open.
1. In the home screen, tap
Turn demo mode off is displayed if the instrument is in demo mode.
2. In the Confirmation screen, tap Ok.
You will be prompted to restart the instrument.
Demo mode is displayed on the instrument when it is in demonstration mode.

Edit the instrument name (administrator only)

1. In the home screen, tap
2. Tap the Instrument name field, then enter or edit the instrument name.
The instrument name must be unique if it is connected to a network.
3. Tap Done.

Set the date and the time

The date and time can be set manually or automatically. The instrument must be connected to the
internet to set the date and time automatically.
1. In the home screen, tap
The Date and Time screen is displayed.
2. Set the slider to Off or On to determine if the date and time are set automatically.
3. (Optional) Select the time zone from the dropdown list.
4. Select the date format and the time format from the dropdown lists.
5. Tap Done.
168
QuantStudio
(Settings)4Instrument settings4Demo mode.
(Settings)4Instrument settings4Instrument name.
(Settings)4Instrument settings4Date and time.
™ 6 Pro Real-Time PCR System and QuantStudio ™ 7 Pro Real-Time PCR System User Guide