Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual page 3

Revision Date
C.0 3 December 2019
(continued)
B.0 22 August 2019
A.0 18 April 2019
Important Licensing Information: These products may be covered by one or more Limited Use Label Licenses. By use of these
products, you accept the terms and conditions of all applicable Limited Use Label Licenses.
NOTICE TO PURCHASER: DISCLAIMER OF LICENSE: Purchase of this software product alone does not imply any license under any
process, instrument or other apparatus, system, composition, reagent or kit rights under patent claims owned or otherwise controlled by
Thermo Fisher Scientific, either expressly, or by estoppel.
• Added Security, Auditing, and E‑signature (SAE) v2.0 module.
• Added instructions to generate and reset an access key for external software to connect to the
instrument.
• Added instructions to import an Assay Information File.
• Corrected that a Connect profile is required for the instrument schedule and Smart Help.
• Added new radio compliance standards.
v1.1.0
•
Corrected the text on the buttons for the following items:
– Add facial authentication to an existing instrument profile.
– View the license agreement.
–
Reset the instrument (restore factory default).
•
Added the following items:
™
– TET dye as a system dye.
–
Information about sleep mode.
–
Information about the automatic sign-out feature.
–
The option to configure the instrument so that sign-in is required (guest access is not
permitted).
– Instructions to set up email notification.
– Information about the speaker volume for each user.
– Instructions to back up the instrument and to restore a backup of the instrument.
– Information about multiple instruments and email notification in the comparison of a local
instrument profile and a Connect profile.
– Instructions to unlink a Connect profile.
– Instructions to update a PIN for a Connect profile.
– Lighting guidelines for facial authentication.
– Radio compliance standards and RF transceiver specifications.
• Corrected the following items:
– Indicators for voice commands.
– Voice commands are only available in select countries.
– Instructions to remove VeriFlex
– Excitation and emission wavelengths of the filters in the calibration instructions.
– Add a four-digit PIN when signing into the instrument for the first time using a Connect
profile.
– Add a four-digit PIN when linking a local instrument profile to a Connect profile.
– Select a region for the Connect cloud-based platform.
– A run cannot be started if a block has never been calibrated on the instrument.
– The options after a calibration run is complete.
– The example files for the desktop software are embedded in the software and do not need to
be downloaded.
•
Updated the following items:
– C Export checkbox is selected as the default.
q
–
Instructions to sign in with facial authentication.
New document (v1.0.1).
Description
™
Zones and the Auto Delta setting.