Connect To The Sae Server - Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual

Chapter 9 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.0 module
9
Enable SAE functions
3. Tap the Server IP field, then enter the IP address of the SAE server.
4. Tap the Port field, enter the port, then tap Next.
5. Enter the SAE administrator user name and password when prompted, then tap Enable.
The home screen is displayed. The SAE administrator is signed in.

Connect to the SAE server

• Install the SAE Administrator Console and the SAE server on a computer with a static IP address
(recommended) or a dynamic IP address.
• Before you connect, close all plate files and data files.
Note: Connect the software and any instruments to the same SAE server to ensure that audit records
are maintained across system components.
1. In the menu bar, click
2. Enter the IP address and port number of the SAE server.
Note: If using a dynamic IP address, enter the hostname instead of the IP address to prevent the
loss of a connection.
3. (Optional) Click Test Connection to confirm that the connection information is correct.
4. Click Save.
144
QuantStudio
System4SAE Connection Settings.
™ 6 Pro Real-Time PCR System and QuantStudio ™ 7 Pro Real-Time PCR System User Guide