Assign Or Edit A Well For A Plate - Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual

If you selected a full row or column in the 96-well view, only the set of wells that was visible in the
96-well view is selected. The full row or column of the 384-well plate is not selected.
3. To return to the full 384-well view from the 96-well section, pinch inwards with two fingers.
View a TaqMan
The Plate tab displays a TaqMan
The samples and reagents are edited by port. The samples and reagents are not edited by well.
The targets are added by an assay information file. The targets cannot be edited on the instrument
touchscreen.
1
Figure 9 Plate tab for a TaqMan
Port
1

Assign or edit a well for a plate

A target or an assay must be defined (see "Add a target or an assay"
A sample setup file can be imported instead of assigning or editing a well manually (see "Import a
sample setup" on page
1. In the Plate tab, tap a well or multiple wells.
2. Tap the Sample Information pane, then tap Samples.
Note: If no wells are selected, the pane is labeled Legend.
3. Enter a sample name.
4. Select a sample type from the dropdown list.
QuantStudio ™ 6 Pro Real-Time PCR System and QuantStudio
™
Array Card
™
Array Card if the TaqMan
™
Array Card
55).
Chapter 4 Edit a plate before starting a run
Options to edit the well details of a plate file
™
Array Card block is installed.
on page
™ 7 Pro Real-Time PCR System User Guide
4
66).
65