Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual page 2

Life Technologies Holdings Pte Ltd | Block 33 | Marsiling Industrial Estate Road 3 | #07-06, Singapore 739256
For descriptions of symbols on product labels or product documents, go to thermofisher.com/symbols-definition.
The information in this guide is subject to change without notice.
DISCLAIMER: TO THE EXTENT ALLOWED BY LAW, THERMO FISHER SCIENTIFIC INC. AND/OR ITS AFFILIATE(S) WILL NOT BE
LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, MULTIPLE, OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR
ARISING FROM THIS DOCUMENT, INCLUDING YOUR USE OF IT.
Revision history Pub. No. MAN0018045
:
Revision Date
G.0 17 February 2021
F.0 6 November 2020
E.0 27 April 2020
D.0 7 January 2020
C.0 3 December 2019
v1.4.0
Updated centrifuges for the TaqMan
v1.4.0
•
Specified that the instrument and the desktop software must be connected to the same SAE server
for an account password to be updated on both applications.
• Provided the option of a static IP address or a dynamic IP address to connect to the SAE server.
• Corrected standards on 384-well RNase P plate (Figure 14
™
• Added a TaqMan Array Card block, including system template file names, calibration workflow,
instructions to edit the plate file, and instructions to load and unload from the instrument
™
(QuantStudio 7 Pro System only).
• Added instructions to review the calibration status in the QuantStudio
Software v2.
• Added a peripheral self-test and updated the previous self-verification test to a hardware test.
• Added instructions to upload a certificate for a TaqMan
• Added the option of a voice recording for Smart Help.
• Added remote support.
• Updated the RFID labels (Figure 27
v1.3.0
• Added protein thermal shift experiments to the instrument functions.
• Added a 96-well 0.1-mL block.
• Updated instructions to export data files when setting up a run and added instructions to import or
delete export settings.
• Updated instructions to save an edited run method.
• Updated instructions to add or edit reagents and then to apply the reagents to the plate.
•
Updated instructions to view the amplification plot after a run.
•
Added instructions to view QC Check status after the run.
• Added information about a locked template file.
• Added functions for using the instrument with the SAE Administrator Console.
v1.2.1
•
Added information about position to set up facial authentication and to sign in with facial
authentication.
• Added instructions to test the connection to the Connect cloud-based platform and to view the
privacy policy for the Connect platform.
• Added instructions to repair the software after a software update.
•
Changed port 7000 to 7443 for the instrument-to-computer connection.
•
Corrected C to C in description of instrument verification.
t q
v1.2.0
• Added a 384-well plate block.
• Updated instructions to set up facial authentication.
•
Added a new voice command for calibration.
•
Added custom melt curve run calibration.
Description
™
Array Card.
on page
™ Array Plate with RFID.
on page 215 and Figure 28
105).
™
Design and Analysis
on page 216).