Export The Instrument Log; View The Instrument Statistics - Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual

• Run
• Change Block
• Error
• Power
2. (Optional) Tap any of the table headings to sort by that parameter.
3. (Optional) Tap an instrument event type in the left pane to filter the list that is displayed by that
event type.
4. Tap Cancel.

Export the instrument log

1. In the home screen, tap
2. (Optional) Tap a type of instrument event to export the log for only that type of event.
If an instrument event is not selected, the logs for all the instrument events will be exported.
3. Tap Export.
4. Select a destination to save the instrument log files.
•
Connect
•
Network Drive
•
USB Drive
Note: You must be signed in with a Connect profile in order to export the instrument log to
Connect.
5. Tap Done.

View the instrument statistics

1. In the home screen, tap
The Instrument Statistics screen is displayed.
• Disk Space Remaining (MB)
• Block Cycle Count
• Block Degree Climbed
• LED Usage (hours)
2. Tap Cancel.
QuantStudio ™ 6 Pro Real-Time PCR System and QuantStudio
(Settings)4Maintenance and service4Instrument log.
(Settings)4Maintenance and service4Instrument statistics.
™ 7 Pro Real-Time PCR System User Guide
Chapter 11 Configure the instrument settings
Configure maintenance and service settings
• Calibration
• Self-Test
• Update
• User
• RNase P Status
• Block Serial Number
• Heated Cover Serial Number
• Block Type
11
179