Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual page 176

Chapter 11 Configure the instrument settings
11
Configure maintenance and service settings
8. In the Microphone Test screen, tap
9. Tap Yes to proceed.
10. In the Camera Test screen, tap Yes to confirm that the camera is on.
A preview is displayed if the camera is on.
11. In the Camera Test screen, tap Yes to confirm that the camera detects a face.
12. In the Camera Test screen, tap Capture to capture an image, then tap Yes to confirm that an
image was captured.
The image should appear clear and in focus.
176
QuantStudio
to record.
™ 6 Pro Real-Time PCR System and QuantStudio ™ 7 Pro Real-Time PCR System User Guide