Security, Auditing, And E-Signature (Sae) V2.0 Module Functions; Functions That Are Controlled - Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual

Chapter 9 Use the instrument with the Security, Auditing, and E‑signature (SAE) v2.0 module
9
Security, Auditing, and E‑signature (SAE) v2.0 module functions
Security, Auditing, and E‑signature (SAE) v2.0 module
functions

Functions that are controlled

The following functions are controlled, depending on the user role:
• Plate setup, including the following functions:
– Create a new template
– Edit the run method
– Edit the analysis settings
– Define, edit, or delete the targets or the assays
– Assign the target or the assay
– Define, edit, or delete the sample
– Assign the samples
– Define, edit, or delete the reagents
– Assign the reagents
• Add and delete a custom dye
• Start and stop an instrument run
• Calibration runs and RNase P verification runs
• Instrument configuration, including the following functions:
– Software update
– Network configuration
– Instrument name change
– Date and time change
– SAE module setting modification
– Sleep setting modification
– Instrument access modification
– Disk management setting modification
– Instrument back-up and restore a back-up
• Log into timed out sessions
• Perform e-signatures
138
QuantStudio ™ 6 Pro Real-Time PCR System and QuantStudio ™ 7 Pro Real-Time PCR System User Guide