Overview Of File Locations And Files - Thermo Scientific Applied Biosystems QuantStudio 6 Pro User Manual

(continued)
Feature
View analysis of results
Set calibration reminders
Review exported calibration or RNase P
verification results

Overview of file locations and files

Note: The term plate file is applicable to both plates and TaqMan
File locations
File location
Run queue
Public
Templates
Connect
Network drive
USB drive
My instrument
QuantStudio ™ 6 Pro Real-Time PCR System and QuantStudio
Description and function
Plate files sent from the desktop software.
• Plate files saved by guest users are stored in this folder.
• Data files from runs started by guest users are stored in this folder.
• System templates are stored in this folder.
• System templates cannot be edited. They must be saved as a separate plate
file and stored in a different folder.
• Data files cannot be saved in this folder.
• Plate files can be retrieved from a Connect profile.
• Data files can be saved to a Connect profile.
• You must have a Connect profile.
• Plate files can be retrieved from a network drive.
• Data files can be saved to a network drive.
• The instrument must be connected to a network or a computer.
• Plate files can be retrieved from a USB drive.
• Data files can be saved to a USB drive.
• A USB drive must be inserted into the instrument.
• This location is only available to a user who is signed in. Guest users cannot
access this location to retrieve plate files or save data files.
• This location is specific to a user. Files are not accessible to any other users,
except for administrators.
• Plate files can be retrieved from this location.
• Data files are always saved to this location.
™ 7 Pro Real-Time PCR System User Guide
Chapter 1 Product information
Instrument Desktop
—
—
—
™
Array Cards.
1
Software description
Connect
(RNase P only)
27