Table of Contents
Advertisement
Installing a New
AT-SBxFAN06
Fan Module
SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
Figure 172. Removing the AT-SBxFAN06 Fan Module from the Chassis
This procedure assumes that you have already removed the old fan
module from the chassis and are continuing directly from the previous
procedure, "Removing the AT-SBxFAN06 Fan Module" on page 272. To
install the new fan module, perform the following procedure
1. Orient the new module with the LED and module name on top and
carefully slide the module into the slot in the chassis. Refer to Figure
173 on page 276.
275
Advertisement
Table of Contents
