Remote Hydraulic Control System (If Equipped); Remote Control Valve (If Equipped); Remote Control Valve Lever (If Equipped) - Kubota MX Series Operator's Manual

HYDRAULIC UNIT
REMOTE HYDRAULIC
CONTROL SYSTEM (IF
EQUIPPED)
You can install the hydraulic-auxiliary-control-valves up
to triple segments.

1. Remote control valve (if equipped)

There are 2 types of remote-control-valves available for
the following models:
• Double acting valve
• Double acting valve with float position
Double-acting-valve with float position may be
placed in the float mode with the remote-control-
valve-lever all the way forward. The cylinder is free
to extend or retract, letting an implement such as a
loader bucket follow the ground.
NOTE :
• You can attach the floating valve as the second
segment only.
(1) Remote control valve lever
with double acting valve
(2) Remote control valve lever
with double acting valve /
float position
(3) Remote control valve lever
with double acting valve
94
(A) Rearward
(B) Forward
(C) Full forward

REMOTE HYDRAULIC CONTROL SYSTEM (IF EQUIPPED)

2. Remote control valve lever (if
equipped)
The remote-control-valve-lever directs pressurized oil
flow to the implement-hydraulic-system.
(1) Remote control valve lever
with double acting valve
(2) Remote control valve lever
with double acting valve /
float position
(3) Remote control valve lever
with double acting valve
Remote control valve lever
with double acting valve (1)
Port-A
Port-B
Pressure
Returning
Remote control
valve lever with
double acting
valve (2)
Port-C
Port-D Out
Pressure
Returning
Remote control valve lever
with double acting valve (3)
Port-E
Port-F
Pressure
Returning
(A) Rearward
(B) Forward
(C) Full forward
Forward Rearward
In Out
Out In
Full For-
Forward
ward
In Float In Out
Float Out
Forward Rearward
In Out
Out In
MX5400,MX6000
Rearward
In