Replacing Head Lamp; Replacing Radiator Hose (Water Pipes); Replacing Fuel Hose; Replacing Intake Air Line - Kubota L2501 Operator's Manual

74 PERIODIC SERVICE
BReplacing Head Lamp
To avoid personal injury or death:
A Be careful not to drop the bulb, hit anything
against the lamp, apply excess force, and get
the lamp scratched. If broken, glass may cause
injury.
A Before replacing the lamp, be sure to turn off
the light and wait until the bulb cools down,
otherwise, you may get burned.
C Removing Bulb
1. Remove the rubber boot.
2. Turn the socket counterclockwise while pressing and
remove it.
3. Remove the bulb.
C Attaching Bulb
1. Align (A) of the bulb with (B) of the lamp case and
attach the bulb.
2. Align (C) of the socket with (D) of the lamp case and
attach the socket.
3. Attach the rubber boot.
(1) Rubber boot
(2) Socket
(3) Bulb
(4) Lamp Case
A Be sure to use a new bulb of the specified wattage.
A Never touch the bulb surface (glass) with bare hands.
Fingerprints, for example, may break the bulb.
(A) "Align to (B)"
(C) "Align to (D)"
BReplacing Radiator Hose (Water pipes)
Replace the hoses and clamps.
(See "Checking Radiator Hose and Clamp" in "EVERY 1
YEAR" in "PERIODIC SERVICE" section.)
BReplacing Fuel Hose
Consult your local KUBOTA Dealer for this service.
BReplacing Intake Air Line
Consult your local KUBOTA Dealer for this service.
BReplacing Power Steering Hose
Consult your local KUBOTA Dealer for this service.
BReplacing Oil Cooler Line
[HST Type]
Consult your local KUBOTA Dealer for this service.