Disassembling And Assembling; Separating Engine - Kubota BX24 Workshop Manual

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM

[2] DISASSEMBLING AND ASSEMBLING

• Before proceding this section, disassembling the loader assembling and backhoe . (Refer to section 8 and
9.)

(1) Separating Engine

Draining Engine Oil
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. Remove the drain plug (1) to drain oil.
4. After draining, screw in the drain plug (1).
(When refilling)
• Fill the engine oil up to the upper line on the dipstick (3).

IMPORTANT
• Never mix two different type of oil.
• Use the proper SAE Engine Oil according to ambient
temperature.
Refer to "LUBRICANTS, FUEL AND COOLANT" (See page
G-7).
Engine oil Capacity
(1) Drain Plug
(2) Oil Inlet
(3) Dipstick
Battery Cables and Battery
CAUTION
• When disconnecting the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable to the battery first.
1. Remove the under panel.
2. Disconnect the negative cable (2) from the battery (1).
3. Disconnect the positive cable (3) from the battery (1) and remove
the battery (1).
(1) Battery
(2) Negative cable
1-S22
ENGINE
3.1 L
3.3 U.S.qts
2.7 Imp.qts
(A) Oil level is acceptable within this
range
W1023464
(3) Positive Cable
W1045893
KiSC issued 08, 2019 A