Adjusting The Front Wheel Turning Stopper Bolt; Wheel Adjustment - Kubota M7132 Operator's Manual

TYRES
(See MAINTENANCE on page 249.)
(1) 540 N ⋅ m / 55.1 kgf ⋅ m / 398 ft ⋅ lbs
(2) 670 N ⋅ m / 68.3 kgf ⋅ m / 494 ft ⋅ lbs
(1) Tread
380/85R28
420/70R28
420/85R28
480/70R28
540/65R28
(1) Tread
460/85R38
520/70R38
520/85R38
580/70R38
650/65R38
M7132, M7152, M7172
Front
1999 mm
1998 mm
1974 mm
1928 mm
Rear
1980 mm
1920 mm
1850 mm
TYRES, WHEELS AND BALLAST
5. Adjusting the front wheel turning
stopper bolt
1. Check the front wheel turning angle each time the
front wheels are changed.
Proceed as follows:
a. Apply the parking brake.
b. Immobilize the tractor using wheel chocks.
c. Raise the front of the tractor.
d. Turn the steering wheel full lock to the left and
subsequently to the right or vice versa and pivot
the axle to its position of maximum oscillation.
2. When the front axle is in the condition of maximum
oscillation and the wheels are turned to the
maximum angle, there must be no interference
between the fenders or tires and engine bonnet or
loader frame.
If necessary, adjust the stopper bolts.
(1) Stopper bolt
Turning angle
380/85R28
420/70R28
420/85R28
480/70R28
540/65R28

WHEEL ADJUSTMENT

WARNING
To avoid personal injury or death:
• When working on slopes or when working with
a trailer, set the wheel tread as wide as practical
for maximum stability.
• Support the tractor securely on stands before
removing a wheel.
• Do not work under any hydraulically supported
devices. They can settle, suddenly leak or be
accidentally lowered. If necessary to work
under the tractor or any machine elements for
(L) Bolt length
Bolt length (L)
25° 47 mm
45° 51 mm
45° 64 mm
45° 71 mm
40° 83 mm
233