Installation Procedure - HP 98568A Installation Instruction

HP 98287 A Graphics Display Station Interface
Installation Procedure
o
HP-HIL SELECT CODE=31
o
FRAME BUFFER
ADDRESS=$300000
0
ADDRESS
MODE=INTERNAL
SELECT CODE=25
III
SW2
Figure 5-1.
Graphics Display Station Interface switches
1. Play It Safe.
a. Turn your computer off and unplug the power cord.
b. Remove the Graphics Display Station Interface from its envelope, being
careful to handle the card only by its edges and metal end plate. The
card may be easily damaged by electrostatic discharge (static zap).
c. Place the card on the envelope.
2. Set the HP-HIL Select Code.
Adding Interface Cards 5-3