HP 98568A Installation Instruction page 352

HP 2225A ThinkJ et Printer
:~
Address 4
Figure 7-1.
Address 4
4. Connect the Printer to the Computer.
a. Get an HP-IB cable.
b. Connect one end of the HP-IB cable to the HP-IB connector on the back
of the printer. Tighten the thumb screws to secure the connection.
c. Connect the other end of the HP-IB cable to the interface.
Note
If the interface already has several cables connected to it,
connect the printer's cable to one of the other devices on the
interface.
5. Connect the Power Cord.
Connect the female end of the power cord to the power socket on the back
of the printer, and connect the other end to your power outlet.
6. Record the Address.
Make a note that address 1 (or the alternate address you chose in step 3)
has been used and is no longer available on the interface you selected. Use
the "Address Record" form on the Chapter 6, "Mass Storage" tab for this
purpose.
And finally ...
Refer to your printer's manual(s) to:
• Load the print head cartridge.
7 -4 Adding Printers