HP 98568A Installation Instruction page 284

HP 7974A Tape Drive
Table 6-19.
HP 7974A Tape Drive
Connected to Built-in HP-IB Interface (Select Code 7)
Device
Path*
File Major
Minor **
Name
Name Type Number Number
HP 7974A, 800 cpi, Berkeley, no rewind
/dev/rmt/#sO
c 9
Ox070n03
HP 7974A, 800 cpi, Berkeley, autorewind /dev/rmt/#sO c 9
Ox070n02
HP 7974A, 800 cpi, AT&T, no rewind
/dev/rmt/#sO
c 9 Ox070nOI
HP 7974A, 800 cpi, AT&T, autorewind /dev/rmt/#sO c 9
Ox070nOO
HP 7974A, 1600 cpi, Berkeley, no rewind /dev/rmt/#sO c
9 Ox070n43
HP 7974A, 1600 cpi, Berkeley, autorewind /dev/rmt/#sO
c 9 Ox070n42
HP 7974A, 1600 cpi, AT&T, no rewind /dev/rmt/#sO c
9 Ox070n41
HP 7974A, 1600 cpi, AT&T, autorewind
/dev/rmt/#sO
c 9 Ox070n40
*
#
is a number that identifies the magnetic tape drive. Replace
#
with any
unique number (e.g., /dev/rmt/OsO for the first mag tape). Record the numbers
on the Chapter 6, "Mass Storage" tab.
**
n
is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace
n
with a 0 if the address was set to 0, use 2 if the address
was set to 2, and so on.
6-58 Adding Mass Storage Devices