HP 98568A Installation Instruction page 233

Table 6-2.
HP Series 6100 Model 600/A
CD-ROM Drive
Model 600/A CD-ROM Drive
Connected to Built-in HP-IB Interface (Select Code 7)
File Major Minor'" ' " Interleave
Device Name
Path'"
Name Type Number
N
umber Factor
Mode1600/A
Mode1600/A
/dev /dsk/#sO b
/dev /rdsk/#sO c
o
4
Ox070nOO
Ox070nOO
o
o
**
# is a number that identifies the CD-ROM drive (for example, 0 for the
root disk, 1 for the next disk installed. Replace # with any unique number,
and use the same number in both the /dev /dsk and /dev /rdsk entries (for
example, /dev/dsk/lsO and /dev/rdsk/lsO).
n is a number that identifies the address (set in step 4 of this installation
procedure). Replace n with a 2 if the address was set to 2, use 3 if the
address set to 3, and so on.
Adding Mass Storage Devices 6-7