English
Hardware Installation
Hardware Installation
To set up your keyboard, mouse and receiver, proceed as follows:
1 Install the AA/LR6 alkaline batteries in the cordless keyboard.
2 Attach the palm rest to the keyboard.
3 Install the AAA/LR03 alkaline batteries in the cordless mouse.
shown inside the battery compartment. Replace the cover.
4 Connect the receiver's USB cable to a USB port on your PC. A
typical example of how this connection is made is shown in the
following diagram:
4 English
Remove the battery compartment cover
on the bottom of the keyboard by
squeezing the cover in from the tab to
release it. Insert the batteries as shown
inside the battery compartment. Replace
the cover.
Remove the battery compartment cover on
the bottom of the mouse by pressing the
tab on the bottom of the mouse, and by
sliding the cover off. Insert the batteries as