HP 98568A Installation Instruction page 92

HP 98635A
Floating Point Math Card
4. Insert the Floating Point Math Card into the slot with the component side
up. Using your thumbs, push on the extractor levers until the card is firmly
seated in the backplane.
5. If you have additional cards to install in the backplane, leave the cover
plates off; otherwise replace the cover plates.
Verification Test
1. Turn your computer on and press the space bar a few times.
2. Check the list of components displayed on the left-hand side of the screen:
• If the message,
HP98635,
appears in the list, you have correctly installed
the Floating Point Math Card .
• If the message above does not appear, repeat the installation procedure. If
the message still does not appear, call your HP Service Representative for
assistance.
INSTALLATION COMPLETE!
Do You Have Another Accessory Card to Add?
NO
Proceed to Chapter 5, "Interface Cards" .
YES Refer to the table of contents for this chapter to find
where your next installation instructions l)('gin.
4-16 Adding Accessory Cards