HP 98568A Installation Instruction page 273

Table 6-15.
HP 7941/42/45/46
HP 7941, 7942, 7945, 7946
Disk and Disk/Tape Drives
Connected to Built-in HP-IB Interface (Select Code 7)
Device Path'"
File
Major Minor
......
Interleave
Name Name Type Number Number Factor
HP 7941/42/45/46 - Disk
/dev/dsk/#sO
b 0
Ox070nOO
1
HP 7941/42/45/46 - Disk
/dev/rdsk/#sO c 4
Ox070nOO
1
HP 7942/46 - Tape
/dev/ct/#sO
b 0 Ox070n10 1
HP 7942/46 - Tape
/dev/rct/#sO
c 4 Ox070n10 1
*
#
is a number that identifies the disk drive (e.g., 0 for the root disk, 1 for the
next disk installed, etc.). Replace
#
with any unique number, and use the same
number in both the /dev/dsk and /dev/rdsk entries (e.g., /dev/dsk/1s0 and
/dev /rdsk/1s0). Record the numbers on the Chapter 6, "Mass Storage" tab.
**
n is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace n with a 0 if the address was set to 0, use 2 if the address
was set to 2, and so on.
Adding Mass Storage Devices 6-47