HP 98568A Installation Instruction page 245

Table 6-6.
HP 7907A
HP 7907 A Disk Drive
Connected to Built-in HP-IB Interface (Select Code 7)
Path*
File Major
Minor **
Interleave
Device Name Name Type Number Number Factor
HP 7907 A - Fixed Disk
/dev/dsk/#sO
b 0
Ox070nOO
1
HP 7907 A - Fixed Disk
/dev/rdsk/#sO
c 4
Ox070nOO 1
HP 7907 A - Removable Disk /dev/dsk/#sO b 0 Ox070nlO
1
HP 7907 A - Removable Disk /dev/rdsk/#sO c
4
Ox070nlO
1
*
#
is a number that identifies the disk drive (e.g., 0 for the root disk, 1 for the
next disk installed, etc.). Replace
#
with any unique number, and use the same
number in both the /dev/dsk and /dev/rdsk entries (e.g., /dev/dsk/lsO and
/dev /rdsk/lsO). Record the numbers on the Chapter 6, "Mass Storage" tab.
**
n is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace n with a 0 if the address was set to 0, use 2 if the address
was set to 2, and so on.
Adding Mass Storage Devices 6-19