HP 98568A Installation Instruction page 499

HP 92205A/C Hayes Smartmodem 1200
Installation Procedure
The following procedure describes how to connect the Smartmodem 1200 to
your computer. Before you do this, however, refer to the manual that came
with the modem to:
• Unpack the modem .
• Contact the telephone company.
And now, the installation procedure ...
1. Play It Safe.
Turn your computer and modem off, if they are not already off.
2. Connect the Telephone Cable.
a. With the gold contacts up, plug one end of the modular telephone cable
into the telephone connector on the back of the modem.
b. Insert the remaining end of the telephone cable into a telephone wall
jack.
3. Select Your Interface and Cable.
The modem can be connected to any of the following RS- 232C interfaces:
• Series 200 Model 216 or 217 built-in "Data Communications" interface-
use an HP 5061-4215 DTE cable.
• Series 300 built-in RS-232C interface-use an HP 13242N or 92221M
cable.
• HP 98626A RS-232C Interface-use an HP 5061-4215 (Option 001 DTE)
cable.
• HP 98628A Datacomm Interface-use an HP 5061-4215 (Option 001
DTE) cable.
• HP 98642A 4-Channel Multiplexer Interface, port 0 (HP-UX only)-
use an HP 92219S, 92218A or 92222M cable. Ports 1,2 and 3 are not
recommended for use with the modem.
• HP 98644A RS-232C Serial Interface-use an HP 13242N, 92218A or
92222M cable.
Adding Miscellaneous Peripherals 10-57